Bench top Wire Cut and Strip machines
Rebuilding and refurbishing wire processing equipment since 1985. We are proud to sell the best in the industry.
C-511-HX
"The Fastest Machine" that anyone can handle! Surprising processing speed at 10,000 pieces/hour!
Speeding up of wire processing is our biggest concern. Kodera thinks that in addition to actual speeding up of processing, to adapt to "smaller terminals" of nowadays or to provide solutions for "easier and quicker changeover for anyone" are absolutely essential for making a real breakthrough of technology.
CASTUGNON C511HX I A-2 has achieved the processing speed of 10,000 pieces/hour* and proved itself to be the "basic machine of the next generation" which is friendly for operators.
※ Processing condition／Wire: UL1061 AWG#26, Total Length: 65mm
Terminal: 0-0179227-1, Setting: Speed/Fast
- Speed of more than double!
- Compact Design!
- High Quality Crimping!
- Flexible Layout
- Crimping Force Monitors fitted as standard equipment!
- Low Noise!
- Quick Change!
- Reduced Maintenance Cost!
- Excellent Operationality!
- Reduced Running Cost!
- Easy Quality and Work Control!
Contact Tri-Tech Kodera at 262-782-4352 for options
Specifications
| Machine Specifications | ||
|---|---|---|
| Processing Lengths | Front end setting range | 0.1〜20mm |
| Rear end setting range | 0.1〜9.9mm | |
| Minimum processing length | L ≧60mm | |
| Maximum cutting length | 99,999mm (100m) | |
| Cutting tolerance | Within ±(0.2+0.002xL)mm; L= Cutting length | |
| Crimper | Crimping terminal | Open barrel chain terminals (side feed) |
| Crimping capacity | Standard 1.2ton, Maximum 2.5ton | |
| Control method | Digital control | |
| Measurement (body only), Weight | Width×Depth×Height | 650mm×550mm×1,210mm |
| Weight | 290kg | |
| Supplies | Electric power supply | AC200V、AC220V、AC240V 50/60Hz |
| Air supply | 17N/min 0.6MPa | |
| Power consumption During rest |
300W | |
| Power consumption At maximum |
980W | |
| Processing wire | Applicable wire diameter | AWG#12〜AWG#32 (Depending on wire) |
| Applicable wire type | AV, AVS, AVSS, CAVUS, KV, KIV, UL, Teflon wire, glasswire, etc. |
|
| Applicators Specifications | ||
| Crimper Side | Width×Depth×Height | 27mm×23mm×79mm |
| Weight | 150g | |
| ID Information | 1. Terminal information (model number, manufacturer) 2. Wire type 3. Core diameter, 4. Crimp height, 5. Crimp force, 6. Appropriatestripping length, 7. Crimp position data, 8. Shot number (maximum 8 digits), 9. Trip shot number (maximum 7 digits), 10. Administrator (or Owner), 11.Control Lot No. | |
| Dies Side | Width×Depth×Height | 39mm×30mm×57mm |
| Weight | 145g | |
| Optical terminal location sensor integrated, ID tag, Wireless RF Approx.100kHz data send/receive device | ||
| ID Information | 1. Terminal information (model number, manufacturer), 2. Shot number (maximum 8 digits), 3. Trip shot number (maximum 7 digits), 4. Administrator (or Owner), 5. Control Lot No. |
|
| Specifications are subject to change without notice due to continual improvements. | ||
